Enersine Series Active Power Filter
¡@ The Enersine series, a true harmonic solution,
is a solid-state power converter that brings about the advantages
of harmonic currents elimination, reactive power factor
compensation, and virtual damping resistance to improve
power quality. The Enersine series behaves like a harmonic
current generator to measure the harmonics generated from
the non-linear loads and cancel these harmonics with a newly
generated, opposite shifted harmonics current of the same
amplitude.
¡@Minimum Heat-loss During Operation Design produces
insertion losses of less than 3% and at full compensation,
offering significant cost saving in energy. For example,
the maximum heat-losses of the Enersine 100A/380Vac is less
than 2Kw.
¡@Active Harmonic Compensation Design
may generate an opposite phase shifted harmonic current
of the same amplitude as the harmonics from UPS, DC Power
Systems/Chargers, Frequency Converters, AC/DC Variable
Speed Drivers, Fluorescent Lamps, Welding Machines, Computer
and Peripherals.
¡@Instantaneous Dynamic Response is
derived from IGBT PWM converter switching at 20KHz high
Frequency using advanced control techniques.
¡@Superior Current-limit capability
will continue to operate in full compensating mode without
shutdown or malfunction in the event of additional loads
being added. No overload risk on the existing Enersine
series will occur.
¡@Unique Patent-owned Parallel Function
enables the Enersine series to be added in parallel on
site later to meet satisfactory of increasing demand.
¡@User-friendly Control Panel enables
to simply turn on/off the unit and feature buzzer silence
and System status from 4 LEDs including Power On, Filtering,
Full Correcting & Error.
¡@Optional Graphic LCD Panel with
special black back-light offers access to all parameters,
waveforms & spectrums for management of both Enersine
and system power quality. The graphic LCD display And
control panel gives easy access for load, source &
Enersine.
¡@Voltage-free Contacts signals may
provide easy monitoring of general alarm, power on and
filtering.
¡@Optional Monitoring and Signaling
may be provided through advanced comprehensive communications
interfaces, such as RS232/RS485 serial port and Ethernet
Network RJ45.
¡@Various Capacity Ranging from 25A
to 200A may increase the maximum capacity up to 1200A
by using parallel technology.
