MFP Series 10-20KVA

True Online Double Conversion with DSP Controlled Pure Sine Wave Design
Input Current Harmonic: ≤ 1%
Optimization Battery Group, The Quantity of Battery: 16/18/20 Nos.
High Input Power Factor 0.99

Download PDF Contact me

Features:

True Online Double Conversion with DSP Controlled Pure Sine Wave Design
Input Current Harmonic: ≤ 1%
Optimization Battery Group, The Quantity of Battery: 16/18/20 Nos.
High Input Power Factor 0.99
High Output Power Factor 1.0
Wide Input Voltage Range: 208~480V AC
Wide Input Frequency Range (50Hz: 45~55Hz / 60Hz:54~66Hz)
Generator Compatibility & Phase Reversal Protection
Support Economic Operation (ECO) Mode
Self-Testing while UPS Startup
Optional Parallel up to 4 units
Static Bypass and Cold Start
Auto Start and cold start function

Rear Panel
1. Fan
2. Input Switch
3. Output Switch
4. Maintenance Switch
5. Terminal
6. Com Port
7. USB Port
8. Parallel Port
9. EPO
10. Intelligent Slot / SNMP(Optional)

Flexible Configuration :

Various type of alarms :-

Overview:

Technical Specifications

MODEL		MFP3110L16	MFP3120L16
Capacity		10 kVA	20 kVA
INPUT
Nominal Voltage		380V / 400V / 415V AC (3P+N+PE)
Operating Voltage Range		190V~499V AC Load Dependant
Operating Frequency Range		50 / 60 Hz ± 10% (Auto Sensing)
Power Factor		≥0.99
Bypass	Voltage	- 40% ~ +15% (Configurable)
	Frequency	± 5% (Configurable)
ECO Range		Same as the Bypass, can be configured
Generator Input		Compatible
OUTPUT
Rated Voltage		220V / 230V / 240V AC L+N+PE (Configurable)
Power Factor		0.8 (Standard) 0.9 / 1.0 (Optional)
Voltage Regulation		±1%
Frequency		Auto Sensing 50 / 60 Hz ± 1~10% Sync Mode (Configurable), 50/60 Hz ± 0.5 Hz Battery Mode
Crest Factor		3:1
Overload		≤105% for Continuos, ≤ 125% for 10 Min, ≤ 150% for 60 Sec, ≥ 150% for 200ms
Harmonic Distortion (THDv)		≤ 1%
Efficiency		94.0% Dual Conversion Mode, 99.0% ECO Mode
BATTERY
Battery Voltage		192V DC / 216V & 240V DC (Configurable)
Typical Recharge Time		4-5 Hours to 90% of full Capacity
Charge Current		10A Configurable (optional)
SYSTEM FEATURES
IP Protection		IP20
Transfer Time		Zero
EPO / ECO / CVCF		Shutdown UPS Immediately / ECO and CVCF Mode can be Configurable
Alarm / Protection		Short Circuit, Input Under/Over Voltage, Over Temperature, Over Current, Over Load, DC BUS Under / Over Voltage and Battery low
LED Display		Line Mode, Backup Mode, ECO Mode, Bypass Mode, Battery Low, Overload & UPS Fault
LCD Display		Input Voltage, Input Frequency, Output Voltage, Frequency, Current; Load Percentage, Battery Voltage, Charging/ Discharging/Current Temperature & Remaining Battery Backup Time, Load VA/W, Load and Battery Barograph
ENVIRONMENTAL
Temperature		Operating: 0~50°C*, Storage: -15ºC ~ 60ºC
Humidity / Altitude		0~95% RH Non-condersing / <1500 M
Noise		<50dBA
PHYSICAL
Dimension WxDxH (mm)		191 x 495 x 350	191 x 495 x 515; Customized as optional
Net Weight (Kg)		18.5	26.5
STANDARDS
Quality		ISO 90001, ISO 14001, ISO 27001, ISO 45001, ISO 50001, BIS, RoHS, FCC
Safety		IEC/EN62040-1; Conformity to IEC / EN
EMC / Performance		IEC/EN62040-2; IEC/EN62040-3, Complying to CE, Compliance to UL
COMMUNICATION INTERFACE
Standard		RS-232
Optional		SNMP / ModBus / Dry Contact / USB / RS-485
Monitoring Software		NetAgent Utility v5.8 / View Power / UPSilon 2000 / Muser 4000

Contact

For More Information about product please contact us

About BPE

Experience center

In the News

International Business

Power Solution

Solar Inverter

Active Power Filter

Accessories

Energy Storage System

Servo and Isolation

Special Products

All Product Catalogue

Proposition

Application

Case study

Get Acquainted